ICAO Heliport FATO Aiming Landing Approach lights

-

ICAO Heliport FATO Aiming Landing lights 


Application:

Helipad FATO Inset LED light is a steady burning white inset installing light. Emitting Omnidirectional white light at night or in the daytime with low visibility to show the accurate loading place for loading helicopter. It is controlled by a switch in the heliport control cabinet.

Compliance Standard:

International Civil Aviation Organization (ICAO), Aerodromes, Annex 14, Volume I, Eighth Edition, dated July 2018
Chromaticity – Appendix 1 Section 2.3.1 White
International Civil Aviation Organization (ICAO), Aerodromes, Annex 14, Volume II Heliports, Fourth Edition, dated July 2013
Photometry – Section 5.3.8.4 referencing Figure 5-11, Illustration 5

ICAO Certificate:

Video:

Heliport Project:


Contact Information:

Ms Jodie Shaw | Sales Engineer
Hunan Chendong Technology Co.，Ltd
T:+86-0731-85563165 85563265
Fax: +86-0731-85563365
Phone: +86-15907360172
A:No.101,#4 Building, XinCheng Science and Technology Park, West of Yuelu Ave., Hi-Tech Development Zone,Changsha city, Hunan
province, China.
W:www.cdt-en.com
E: jodie@chendongtech.com





Comments

Post a Comment

Popular posts from this blog

AC220V AC230V Towers,Building,Chimney Photocell ,GPS Obstruction Lights and Controller

-
Image
Application Widely used in various fields of the air force,civilian airports and obstacle free airspace,helipads,iron tower,chimney,ports,wind power  plants,bridge and city high-rise building where require aviation Warning lights. Key Feature of CM-DKN Use the 304SUS shell and spray coating techniques, resistance to corrosion, anti-UV. The voltage of the power circuit and signal control line is same, so the connection of the wires are simple and reliability,  it will not cause damage to the lights and controller when connect the error line shortly. There is a customized fault alarm function in the control panel. When some of lamps and lanterns’ failure are occurred, the control panel will indicate the failure and also alarm with dry contact. The controller is patched with GPS receiver and photocell. The photocell is indicated to control the lights on/off automatically. The GPS receiver is used to control all of lights synchronization function. The fun...
Read more