Aviation Obstruction Lighting Broadcast MET towers 32.5cd Type B Low Intensity l 810 led emergency lights

-




Product Name
led emergency lights
Operation Voltage
AC220V
Power consumption
≤5W
Flashing frequency
Steady On
Light intensity
≥32cd
Life span
＞100,000 hours
Emitting color
RED
Beam angle
360° horizontal,more than 3° vertical beam spread
Overall size(mm)
∅150mm×230mm
Installation size(mm)
∅125mm×4-M10
Ingress protection
IP65
Lightning protection level
10KA
Optical Sensitivity
100Lux
Operating temperature
-40℃～55℃
Net weight
1.5kg
Wind load
80m/sec
Any question,Pls contact with me!!
www.cdt.en.alibaba.com 

Comments

Post a Comment

Popular posts from this blog

High Intensity Type A Aircraft Warning Lights (ICAO & FAA Standard) for Wind Turbines

-
Image
 As wind energy continues to grow globally, safety remains a top priority—not just on the ground but also in the sky. Tall wind turbines, often located in open landscapes or offshore, must be equipped with reliable aircraft warning systems to prevent aerial accidents. One of the most critical components in this system is the High Intensity Type A Aircraft Warning Light , designed in accordance with ICAO and FAA regulations . What Is a Type A High Intensity Aircraft Warning Light? Type A lights are high-intensity white flashing obstruction lights used for structures over 150 meters (approx. 500 feet) above ground level. These lights provide visibility from long distances both during the day and night. They are particularly suitable for tall structures such as: Wind turbines Communication towers Chimneys Transmission line pylons Skyscrapers in remote areas These lights typically flash at 40 FPM (flashes per minute) and have an intensity range of 2000cd (candela) ...
Read more

Aircraft Warning Spheres used for High voltage transmission line,supply the Orange,White and Red color

-
Image
CM-ZAQ Aircraft Warning Sphere DESCRIPTION Aviation obstruction marking sphere is designed to provide daytime visual warning or nighttime visual warning if comes with reflective tape, for electricity transmission line and overhead wire for aircraft pilots, especially cross river high voltage transmission lines. CDT power line marker ball is made of high-grade Fiberglass Reinforced Plastics(FRP), diameter of 600mm and 800mm are available to meet different customers’ needs. A marking sphere should be of one color such as aviation orange, white and red. Generally, the marking spheres are placed on the highest line. Where there is more than one line at the highest level, white and red, or white and orange spheres should be displayed alternately. This alternating color scheme provides the most conspicuity against all back ground. FUNCTIONS & FEATURES Super corrosion resistant character, stainless steel bolts and nuts Aluminum alloy cable clamp guarantees good corrosion resistance Various ...
Read more