Building Chimney ICAO certificate WHITE Flash Type A Medium Intensity LED aviation light specification

-
Product Name
aviation light specification
Power consumption
≤30W
Flashing frequency
20～60times/min
Light intensity
Type A :20000cd
Life span
＞100,000 hours
Beam angle
360° horizontal,more than 3° vertical beam spread
1.Lamp shade of the light adopts PC with anti-UV which is high efficiency light transmission up to 90%, quite high impact resistance and fit the bad environment very well.
2.The aluminum alloy base with painting by spraying plastics, the structure is high strength, resistance to corrosion.

3.Light source adopts LED with long lifespan up to 100,000hrs, lower power consumption controller and high efficiency.

4. Based on the single chip computer automatic control, and also could be controlled by controller
5. Used the photosensitive probe fit for the natural light spectrum curve, automatic control light intensity level.

6. The circuit of the light has surge protection whose lightning proof ability is In 7.5KA/5 times, Imax 15KA so that the light is suitable to harsh environment.

7. Integral structure, protection lever of IP65.

8. Ignitability rate UL-94V0, fit for all kinds of industrial situation.

9. Could choose controller to control the synchronous switch function.

Any question,pls contact with me,Thanks

Comments

Post a Comment

Popular posts from this blog

AC220V AC230V Towers,Building,Chimney Photocell ,GPS Obstruction Lights and Controller

-
Image
Application Widely used in various fields of the air force,civilian airports and obstacle free airspace,helipads,iron tower,chimney,ports,wind power  plants,bridge and city high-rise building where require aviation Warning lights. Key Feature of CM-DKN Use the 304SUS shell and spray coating techniques, resistance to corrosion, anti-UV. The voltage of the power circuit and signal control line is same, so the connection of the wires are simple and reliability,  it will not cause damage to the lights and controller when connect the error line shortly. There is a customized fault alarm function in the control panel. When some of lamps and lanterns’ failure are occurred, the control panel will indicate the failure and also alarm with dry contact. The controller is patched with GPS receiver and photocell. The photocell is indicated to control the lights on/off automatically. The GPS receiver is used to control all of lights synchronization function. The function of this aviat
Read more