Approach and takeoff lighting Icao Annex 14 volume ii LED heliports perimeter lighting design

-
Product Picture
1.The lamp cover adopts PC material with excellent impact resistance (IZOD notch impact strength: 90), thermal stability (service temperature can be 130℃), great transparency (available with a light transmission of up to 90%), auto-UV resistance, aging resistance and flammability rating in UL94V0.
2.House of the light is made of aluminum liquid casting and oxidation treatment, the product features are omniseal, water tightness and corrosion resistance.
3.Light source adopts the international advanced LED featuring low power consumption, high efficiency and light source lifespan reaching 100,000 hr.
4.The light with surge protection device (In 7.5KA/5 times, Imax 15KA) can be used in the harsh environment.
Product name
perimeter lighting design
Operating Voltage
AC220V/6.6A (As customization)
Power Consumption
<10W
Light Source
Green LED
Light Intensity 
25cd
Emitting Color
Green
Ingress Protection
Ip68
Enviroment Humidity
0~100%
Altitude
<4500m
Operating Temperature
-55oC-55oC
Wind Load
80m/s
Weight
6.5kg
Overall Dimension
220*125mm
If interested,Pls contact with me.Thanks
Parameter & Diagram

Comments

Post a Comment

Popular posts from this blog

AC220V AC230V Towers,Building,Chimney Photocell ,GPS Obstruction Lights and Controller

-
Image
Application Widely used in various fields of the air force,civilian airports and obstacle free airspace,helipads,iron tower,chimney,ports,wind power  plants,bridge and city high-rise building where require aviation Warning lights. Key Feature of CM-DKN Use the 304SUS shell and spray coating techniques, resistance to corrosion, anti-UV. The voltage of the power circuit and signal control line is same, so the connection of the wires are simple and reliability,  it will not cause damage to the lights and controller when connect the error line shortly. There is a customized fault alarm function in the control panel. When some of lamps and lanterns’ failure are occurred, the control panel will indicate the failure and also alarm with dry contact. The controller is patched with GPS receiver and photocell. The photocell is indicated to control the lights on/off automatically. The GPS receiver is used to control all of lights synchronization function. The fun...
Read more