Below 45meter structure ICAO Appendix14 FAA-L810 Anti-UV Anti-Corrosion Aluminium Alloy PC Material Low Intensity obstacle light

Ref standard	ICAO Appendix 14 Low intensity obstruction light FAA-L810
Light source	LED	Emitting color	red
Light intensity	≥32.5cd	Vertical beam spread	≥10°
Horizontal beam angle	360°	Power consumption	≤5W
Operation voltage	AC220V	Voltage frequency	50HZ/60HZ
Lifespan	≥100,000h	Working mode	Steady burning
Light controlled sensitivity	50~100 lux	Wind load	≥ 80m/s
Operation temperature	-40℃~+55℃	Operating humidity	0%~90%
IP Grade	IP65	Net Weight	1.5Kg

Product Features

1) Installed the light on horizontal surface that have enough strength.

2)When installing, pls don’t put the photocell face the nearby light source, also can’t be hidden by the nearby objects.

3)The identification of the line, lamps with one four-core cable: the brown and black line is the power line, the brown wire is the live wire (L), the black wire the null line (N); the yellow-green wire is the ground wire. Blue is signal line

4)Connection:

A: When the lamps use single, the brown wire connect to the Live line, black wire connect to Null wire, , then the light could work normally;

B: When more than one lights need to synchronization, all the lights’ brown wire connect to the live line, all the black wire connect to the null line, could arrive synchronization flashing.

5)For the GPS synchronization function test, pls do it outdoor and no shade environment, it will need about 10 minutes.(Only for the GPS synchronization type)

Attention

1)All the lines must be connected correctly, otherwise may damage the light. Please look at the mark and introduction carefully.

2)The power supply of this type of light is AC220V. Do not use other power supply, such as 380V, otherwise the light will be quickly damaged.

3)In order to avoid being struck by lightning, the lamp is prohibited to install on the top or the edge of the iron tower (When necessary, it could add lightning arrester on the outside of the lamps).

4)There will be a temperature rise when working, it is normal situation.

5)When the light working, in order to avoid the dangerous, pls don’t open any part of the light body.

6)This product is a sealing structure, pls don’t dismounting if you are non-professional technicians, Otherwise, we are not responsible for warranty repair.

Any question,pls contact with me.Thanks