GSM Monopole Transmission Tower Flash Solar Power Medium Intensity single solar aviation obstruction light

-
Product Description

1.Lamp shade of the light adopts PC with anti-UV which is high efficiency light transmission up to 90%, quite high impact resistance and fit the bad environment very well.

2.The aluminum alloy base with painting by spraying plastics, the structure is high strength, resistance to corrosion.

3.Light source adopts LED with long lifespan up to 100,000hrs, lower power consumption controller and high efficiency.
Product Name
single solar aviation obstruction light
Operation Voltage
DC12V(Solar powered)
Power consumption
≤10W
Flashing frequency
20～60times/min
Light intensity
Type B :2000cd
Life span
＞100,000 hours
Emitting color
RED
Beam angle
360° horizontal,more than 3° vertical beam spread
Overall size(mm)
∅255mm×255mm×515mm
Installation size(mm)
∅105mm×4-M10
Ingress protection
IP65
Lightning protection level
10KA
Optical Sensitivity
100Lux
Operating temperature
-40℃～55℃
Net weight
17KG
Wind load
80m/sec
Detailed Images
                                                                                                                                            Any Interested,Please Contact With Me!!!!
Application
Certifications
Our Company

Comments

Post a Comment

Popular posts from this blog

AC220V AC230V Towers,Building,Chimney Photocell ,GPS Obstruction Lights and Controller

-
Image
Application Widely used in various fields of the air force,civilian airports and obstacle free airspace,helipads,iron tower,chimney,ports,wind power  plants,bridge and city high-rise building where require aviation Warning lights. Key Feature of CM-DKN Use the 304SUS shell and spray coating techniques, resistance to corrosion, anti-UV. The voltage of the power circuit and signal control line is same, so the connection of the wires are simple and reliability,  it will not cause damage to the lights and controller when connect the error line shortly. There is a customized fault alarm function in the control panel. When some of lamps and lanterns’ failure are occurred, the control panel will indicate the failure and also alarm with dry contact. The controller is patched with GPS receiver and photocell. The photocell is indicated to control the lights on/off automatically. The GPS receiver is used to control all of lights synchronization function. The fun...
Read more