AC220V AC230V Towers,Building,Chimney Photocell ,GPS Obstruction Lights and Controller

Application

Widely used in various fields of the air force,civilian airports and obstacle free airspace,helipads,iron tower,chimney,ports,wind power plants,bridge and city high-rise building where require aviation Warning lights.

Key Feature of CM-DKN

• Use the 304SUS shell and spray coating techniques, resistance to corrosion, anti-UV. The voltage of the power circuit and signal control line is same, so the connection of the wires are simple and reliability, it will not cause damage to the lights and controller when connect the error line shortly.
• There is a customized fault alarm function in the control panel. When some of lamps and lanterns’ failure are occurred, the control panel will indicate the failure and also alarm with dry contact.
• The controller is patched with GPS receiver and photocell.
• The photocell is indicated to control the lights on/off automatically.
• The GPS receiver is used to control all of lights synchronization function.
• The function of this aviation obstruction light controller is very powerful, performance is reliable and safe. Use and maintenance is simple and convenient; and with anti-surge device.

Parameter
Items	Parameter
Power Input	AC220-230V
Power Consumption	≤15W
Load Capacity	≤4KW
Controlled the light intensity	20-60 times/min
Controlled light quantity	200PCS
Ingress Protection	IP43
Photocell sensitivity	50~500Lux
Environment temperature	-40℃~45℃
Altitude	≤4500m
Environment humidity	≤95%
Wind Load	80m/s
Net Weight	10kg
Overall Size	460mm*300mm*153mm

Structure

Control with 3pcs Obstruction lights (GPS and Photocell)

Photocell	GPS
Photocell with a-10-meter cable,which is installed the non-obstacle place.Even more,do not point at other light source in case of effecting its working.	GPS receiver is built-in a length of 10m cable,which should be installed a place without obstacles.There is magnet in the bottom,which can be absorbed on any steels.