Double Solar Power 10cd 32cd Low Intensity Obstruction lights

-
Feature：Low power, easy to install, Solar Powered.
Application：It is suitable for installation on fixed buildings, structures, such as electric power towers, communication towers, chimneys, high-rise buildings, large bridges, large port machinery, large construction machinery, wind turbines and other obstacles to warn the aircraft.
Name：Solar Power Double Low Intensity Intensity Obstruction lights(Solar Power Supply,Main Replacement Lamp)
Operation Environment： 
Working temperature: -40 ° C ┉ +55 ° C; Relative humidity: 0% ~ 95%;
Wind power: no more than 240km/h; rain: exposed to rain in any wind direction;
Salt spray: exposed to salt spray; irradiation: exposed to solar radiation.
Working conditions: input voltage: solar DC6.5V ± 10

2.Safety precautions
l Avoid installing at the top and bottom of the building. If installed on the top floor of a building, it is best to connect the ground wire to the lightning protection or install a lightning rod to avoid lightning strikes.
l When working on the product, it is strictly forbidden to open any part of the lamp body to prevent danger.
l This product will have a temperature rise during operation, which is normal.
l This product is a sealed structure. Non-professional maintenance personnel should not disassemble it. Once found, the company will not guarantee it.

3.Product and Working Principle



Comments

Post a Comment

Popular posts from this blog

AC220V AC230V Towers,Building,Chimney Photocell ,GPS Obstruction Lights and Controller

-
Image
Application Widely used in various fields of the air force,civilian airports and obstacle free airspace,helipads,iron tower,chimney,ports,wind power  plants,bridge and city high-rise building where require aviation Warning lights. Key Feature of CM-DKN Use the 304SUS shell and spray coating techniques, resistance to corrosion, anti-UV. The voltage of the power circuit and signal control line is same, so the connection of the wires are simple and reliability,  it will not cause damage to the lights and controller when connect the error line shortly. There is a customized fault alarm function in the control panel. When some of lamps and lanterns’ failure are occurred, the control panel will indicate the failure and also alarm with dry contact. The controller is patched with GPS receiver and photocell. The photocell is indicated to control the lights on/off automatically. The GPS receiver is used to control all of lights synchronization function. The function of this aviat
Read more