Building Chimneys L864 ICAO Certificated Red Flashing Medium intensity obstruction lights with IP65 controller

Application
Widely used in various fields of the air force,civilian airports and obstacle free airspace,helipads,iron tower,chimney,ports,wind power plants,bridge and city high-rise building where require aviation Warning lights.
Building AC230V LED Type B Medium Intensity Single obstruction light with control boards for night (Red 2000cd)

Key Feature of CK-15
  • Lamp shade of the light adopts PC with anti-UV which is high efficiency light transmission up to 95%, quite high impact resistance and fits the bad environment very well.
  • House of the light is made of urther; aluminum alloy and painted by spraying plastics, the structure is high strength, resistance to corrosion;
    Using parabolic reflector optical design, range further;
  • Light source adopts high quality LED, low power consumption,long lifespan, high brightness;
  • Based on the single chip computer control, automatic identification sync signal, do not distinguish
    the main light and auxiliary light, and also could be controlled by the controller;
  • Same power supply voltage with synchronous signal, integrate in power supply cable, eliminate the
    damage by error installation caused;
  • Used the photosensitive probe fit for the natural light spectrum curve, automatic control light
    intensity level;
  • The circuit of the light has surge protection whose lightning proof ability is In 7.5KA/5times, Imax
    15KA so that the light is suitable for a harsh environment;
  • Integral structure, protection level of Ip65;
  • Ignitability rate UL-94V0, fit for all kinds of industrial situation;

Ref standard
ICAO Appendix 14 Type B Medium intensity obstruction light FAA-L864
Light source
LED
Emitting color
RED
Light intensity
2000cd
Vertical beam spread
≥3°
Horizontal beam angle
360°
Power consumption
10W
Operation voltage
AC900~AC260V
Voltage frequency
50HZ/60HZ
Lifespan
≥100,000h
Working mode
GPS Flashing
Light controlled sensitivity
50~100 lux
Flashing frequency
20 times/minutes
Operation temperature
-40℃~+55℃
Operation Humidity
0%~90%
IP Grade
IP65
Net Weight
3.5Kg
Parameter Of Control Boards
Items
Parameter
Power Input
AC220-230V
Power Consumption
≤15W
Load Capacity
≤4KW
Controlled the light intensity
20-60 times/min
Controlled light quantity
200PCS
Ingress Protection
IP43
Photocell sensitivity
50~500Lux
Environment temperature
-40~45
Altitude
≤4500m
Environment humidity
≤95%
Wind Load
80m/s
Net Weight10kg
Overall Size
460mm*300mm*153mm
CK-15 B StructureController Structure
Building AC230V LED Type B Medium Intensity Single obstruction light with control boards for night (Red 2000cd)
Building AC230V LED Type B Medium Intensity Single obstruction light with control boards for night (Red 2000cd)

Control with 3pcs Obstruction lights
(GPS and Photocell)
Building AC230V LED Type B Medium Intensity Single obstruction light with control boards for night (Red 2000cd)
PhotocellGPS
Building AC230V LED Type B Medium Intensity Single obstruction light with control boards for night (Red 2000cd)Photocell with a-10-meter cable,which is installed the non-obstacle place.Even more,do not point at other light source in case of effecting its working.
Building AC230V LED Type B Medium Intensity Single obstruction light with control boards for night (Red 2000cd)
GPS receiver is built-in a length of 10m cable,which should be installed a place without obstacles.There is magnet in the bottom,which can be absorbed on any steels.
Project Pictures
Building AC230V LED Type B Medium Intensity Single obstruction light with control boards for night (Red 2000cd)

Comments

Popular posts from this blog

AC220V AC230V Towers,Building,Chimney Photocell ,GPS Obstruction Lights and Controller