CK-11L Type A 10cd Low Intensity Obstruction lights used for airport,ICAO,Red Steady-on

-

Application
      Widely used in various fields of the Air Force, civilian airports and obstacle free airspace, helipads, iron tower, chimney, ports, wind power plants, bridge and city high-rise buildings where require aviation warning.
      Usually used below 45m.

Key Feature
●    Lamp shade of the light adopts PC with anti-UV which is high efficiency light transmission up to 90%, quite high impact resistance and fits the harsh environment very well.
●    House of the light is made of aluminum alloy and steel, painted by spraying plastic, the structure is high strength ,resistance to corrosion.
●    Using Parabolic reflector optical design, range further.
●    Light source adopts LED with long life-span ,lower power consumption and high efficiency.
●    Based on the single chip computer control , automatic identification syncsignal ,do not
distinguish the main light and auxiliary light ,and also could be controlled by the controller.
●    Same power supply voltage with synchronous signal , integrate in power supply cable ,eliminate the damage by error installation caused.
●    Used the photosensitive probe fit for the natural light spectrum curve, automatic control light intensity level.
●    The circuit of the light has surge protection whose lightning proof ability is In 7.5KA/5 times, Imax 15KA so that the light is suitable for a harsh environment.
●    Integral structure, protection level of IP65.
●    Synchronizing function is available.

If you need more information,please contact with us
Email: jodie@chendongtech.com
Web: www.cdt-en.com

Comments

Post a Comment

Popular posts from this blog

AC220V AC230V Towers,Building,Chimney Photocell ,GPS Obstruction Lights and Controller

-
Image
Application Widely used in various fields of the air force,civilian airports and obstacle free airspace,helipads,iron tower,chimney,ports,wind power  plants,bridge and city high-rise building where require aviation Warning lights. Key Feature of CM-DKN Use the 304SUS shell and spray coating techniques, resistance to corrosion, anti-UV. The voltage of the power circuit and signal control line is same, so the connection of the wires are simple and reliability,  it will not cause damage to the lights and controller when connect the error line shortly. There is a customized fault alarm function in the control panel. When some of lamps and lanterns’ failure are occurred, the control panel will indicate the failure and also alarm with dry contact. The controller is patched with GPS receiver and photocell. The photocell is indicated to control the lights on/off automatically. The GPS receiver is used to control all of lights synchronization function. The fun...
Read more