110KV High Voltage transmission line Towers use the Solar power Type B medium intensity obstruction lights

-
110KV High Voltage transmission line Towers use the Solar power Type B medium intensity obstruction lights

Application: Widely used in various fields of the Air Force, civilian airports and obstacle free airspace, helipads, iron tower, chimney, ports, wind power plants, bridge and city high-rise buildings where require aviation warning.

Compliance:
●FAA L-864
●International Civil Aviation Organization (ICAO), Aerodromes, Annex 14, Volume I, Eighth Edition, dated July 2018

Optical Feature:
●Infrared Lighting - NVG and NVIS compatibility using 850nm infrared (IR) LEDs.
●Overvoltage Protection
●Adjustable Mounting Pedestal - For mounting in variable mounting positions.

ICAO Test Report:
Item  Parameter
Operating voltage            DC12V
Power consumption             ≤10W
Flashing frequency             20～60times/min
Light source                       Red LED
Light intensity                       2000cd(±25%)
Lifespan                                 ＞100,000hours
Emitting color                       Red
Beam angle                360 degree horizontal beam angle 
                                    ≥3 degree  vertical beam spread 
Method of synchronization    GPS
Overall size(mm)             550mm×530mm×290mm 
Installation size(mm)       235mm*235mm-4×M10 
Ingress protection             Ip65
Lightning protection level      15KA
Light controlled sensitivity     100Lux
Operating temperature           -40℃～55℃
Net weight                                 18kg
Wind load                                  80m/sec                            

Video                                          

Comments

Post a Comment

Popular posts from this blog

AC220V AC230V Towers,Building,Chimney Photocell ,GPS Obstruction Lights and Controller

-
Image
Application Widely used in various fields of the air force,civilian airports and obstacle free airspace,helipads,iron tower,chimney,ports,wind power  plants,bridge and city high-rise building where require aviation Warning lights. Key Feature of CM-DKN Use the 304SUS shell and spray coating techniques, resistance to corrosion, anti-UV. The voltage of the power circuit and signal control line is same, so the connection of the wires are simple and reliability,  it will not cause damage to the lights and controller when connect the error line shortly. There is a customized fault alarm function in the control panel. When some of lamps and lanterns’ failure are occurred, the control panel will indicate the failure and also alarm with dry contact. The controller is patched with GPS receiver and photocell. The photocell is indicated to control the lights on/off automatically. The GPS receiver is used to control all of lights synchronization function. The fun...
Read more