Type A White Flashing Medium Intensity Obstruction lights for electric Power Towers

-
Type A White Flashing Medium Intensity Obstruction lights for electric Power Towers 
Application:
Widely used in various fields of the Air Force, civilian airports and obstacle
free airspace, helipads, iron tower, chimney, ports, wind power plants, bridge and
city high-rise buildings where require aviation warning.
Usually used above 45m and less than 150m buildings, could use alone, also
could use with Medium OBL type B and Low intensity OBL type B together.

Video:
Production Parameter
Item
Parameter
Item
Parameter
Standard
FAA,ICAO Standard
Light intensity
 2000~20000cd(±25%)
Operating voltage
 AC220V (Other available)
Lifespan
＞100,000hours
Power consumption
 ≤30W
Emitting color
White
Flashing frequency
20～60times/min
Beam angle
360 degree horizontal beam ≥ 3 degree anglevertical beam spread
Light source
White
Wind load
80m/sec
Method of synchronization
GPS
Overall size(mm)
Ф268mm×206mm
IP Rating 
IP65
Installation size(mm)
166mm×166 mm -4×M10
Lightning protection level
10KA
Operating temperature
 -40℃～55℃
Light controlled sensitivity
100Lux
Net weight
7kg
ICAO Certificate
Contact Us
Ms Jodie Shaw | Sales Engineer
Hunan Chendong Technology Co.，Ltd
T:+86-0731-85563165 85563265
Fax: +86-0731-85563365
Phone: +86-15907360172
A:No.101,#4 Building, XinCheng Science and Technology Park, West of Yuelu Ave., Hi-Tech Development Zone,Changsha city, Hunan
province, China.
W:www.cdt-en.com
E: jodie@chendongtech.com

Comments

Post a Comment

Popular posts from this blog

AC220V AC230V Towers,Building,Chimney Photocell ,GPS Obstruction Lights and Controller

-
Image
Application Widely used in various fields of the air force,civilian airports and obstacle free airspace,helipads,iron tower,chimney,ports,wind power  plants,bridge and city high-rise building where require aviation Warning lights. Key Feature of CM-DKN Use the 304SUS shell and spray coating techniques, resistance to corrosion, anti-UV. The voltage of the power circuit and signal control line is same, so the connection of the wires are simple and reliability,  it will not cause damage to the lights and controller when connect the error line shortly. There is a customized fault alarm function in the control panel. When some of lamps and lanterns’ failure are occurred, the control panel will indicate the failure and also alarm with dry contact. The controller is patched with GPS receiver and photocell. The photocell is indicated to control the lights on/off automatically. The GPS receiver is used to control all of lights synchronization function. The function of this aviat
Read more