Helipad Lighting SAGA System of Azimuth Guidance for Approach

-

 SAGA System of Azimuth Guidance for Approach


Key Features:

  1. Comprise of 2 “Flashing” Units (master and slave) lights.
  2.  Powered in 110Vac-230Vac 50/60 Hz.
  3. Pre-focused reflector lamps 12 Vac 105 W.
  4. Consumption: Less than 250Watts for total SAGA system.
  5. Visual range: 10 nautical miles in standard visibility condition.
  6. Angular sector: 15° on both side of approach axis.
  7. Axis accuracy: +/-0.45° in azimuth.
  8. Delay between flashes: 60 to 300 ms.
  9. “Flashes” frequency: 0.5Hz.





Construction&Physical:
· Light: casting aluminum(body, cap, support) .
· Power Supply Box: reinforced polyester.
· Legs: frangible
· Fastenings: stainless steel.
· IP rating: IP65.
· Working temperature: -40°C to +50°C.





Video

If you have inquiry,Please contact with us.
Email: jodie@chendongtech.com


Comments

Post a Comment

Popular posts from this blog

AC220V AC230V Towers,Building,Chimney Photocell ,GPS Obstruction Lights and Controller

-
Image
Application Widely used in various fields of the air force,civilian airports and obstacle free airspace,helipads,iron tower,chimney,ports,wind power  plants,bridge and city high-rise building where require aviation Warning lights. Key Feature of CM-DKN Use the 304SUS shell and spray coating techniques, resistance to corrosion, anti-UV. The voltage of the power circuit and signal control line is same, so the connection of the wires are simple and reliability,  it will not cause damage to the lights and controller when connect the error line shortly. There is a customized fault alarm function in the control panel. When some of lamps and lanterns’ failure are occurred, the control panel will indicate the failure and also alarm with dry contact. The controller is patched with GPS receiver and photocell. The photocell is indicated to control the lights on/off automatically. The GPS receiver is used to control all of lights synchronization function. The fun...
Read more