Heliport Perimeter light TLOF GREEN, LED Floodlight,2021 year helipad CDT project.

-

 Heliport Perimeter light TLOF GREEN, LED Floodlight,2021 year helipad CDT project




CM-HT12/CQ heliport perimeter light is a steady burning Blue/green/yellow inset installing light. Emitting omnidirectional green light at night or in the daytime with low visibility to indicate the perimeter of heliport touchdown and lift-off area, to indicate the safe landing area for the helicopter pilot. It is controlled by a switch in the heliport control cabinet.





CM-HT12/N heliport flood light is a ground surface installation light. It's used to lighten the surface of the heliport, ensuring the heliport surface illumination not less than 10 Lux, making the heliport sign easy to see and giving the landing heliport accurate guidance. Uniform illumination of the heliport make the pilot to reduce eye glare as much as possible in short distance.




Contact Us
Ms Jodie Shaw | Sales Engineer
Hunan Chendong Technology Co.，Ltd
T:+86-0731-85563165 85563265
Fax: +86-0731-85563365
Phone: +86-15907360172
A:No.101,#4 Building, XinCheng Science and Technology Park, West of Yuelu Ave., Hi-Tech Development Zone,Changsha city, Hunan
province, China.
W:www.cdt-en.com
E: jodie@chendongtech.com

Comments

Post a Comment

Popular posts from this blog

AC220V AC230V Towers,Building,Chimney Photocell ,GPS Obstruction Lights and Controller

-
Image
Application Widely used in various fields of the air force,civilian airports and obstacle free airspace,helipads,iron tower,chimney,ports,wind power  plants,bridge and city high-rise building where require aviation Warning lights. Key Feature of CM-DKN Use the 304SUS shell and spray coating techniques, resistance to corrosion, anti-UV. The voltage of the power circuit and signal control line is same, so the connection of the wires are simple and reliability,  it will not cause damage to the lights and controller when connect the error line shortly. There is a customized fault alarm function in the control panel. When some of lamps and lanterns’ failure are occurred, the control panel will indicate the failure and also alarm with dry contact. The controller is patched with GPS receiver and photocell. The photocell is indicated to control the lights on/off automatically. The GPS receiver is used to control all of lights synchronization function. The function of this aviat
Read more