Solar power Type A Medium intensity Warning lights, 2000cd-20000cd White Flashing, uses for high building, ICAO FAA L-865 Standard

-

 For optimized Solar Power Type A Medium Intensity Warning Lights that comply with ICAO FAA L-865 standards, consider the following specifications:

Key Specifications:

  1. Light Output: Adjustable intensity between 2000 cd and 20000 cd to ensure visibility under various environmental conditions.
  2. Color: White flashing light, adhering to ICAO and FAA standards for high buildings.
  3. Flash Rate: Typically between 40 to 60 flashes per minute, ensuring high visibility.
  4. Power Source: Solar-powered system with an integrated battery backup for reliable performance, even during low sunlight conditions.
  5. Photovoltaic Panels: High-efficiency solar panels designed to maximize energy absorption and conversion.
  6. Battery Capacity: Sufficient capacity to ensure operation for multiple days without sunlight, with solar management systems to optimize charging.
  7. Durability: Weather-resistant materials (IP65 or higher) to withstand harsh environmental conditions.

Installation Considerations:

  • Height and Placement: Mounted at appropriate heights to ensure visibility for approaching aircraft, typically on the highest points of the building.
  • Angle Adjustment: Ability to adjust the angle for optimal light projection and visibility.
  • Maintenance: Easy access for maintenance checks and battery replacement to ensure longevity and operational reliability.

This configuration will provide an effective warning system for high buildings, ensuring compliance with ICAO and FAA standards.

Welcome to inquiry, Email: jodie@chendongtech.com 


Comments

Post a Comment

Popular posts from this blog

AC220V AC230V Towers,Building,Chimney Photocell ,GPS Obstruction Lights and Controller

-
Image
Application Widely used in various fields of the air force,civilian airports and obstacle free airspace,helipads,iron tower,chimney,ports,wind power  plants,bridge and city high-rise building where require aviation Warning lights. Key Feature of CM-DKN Use the 304SUS shell and spray coating techniques, resistance to corrosion, anti-UV. The voltage of the power circuit and signal control line is same, so the connection of the wires are simple and reliability,  it will not cause damage to the lights and controller when connect the error line shortly. There is a customized fault alarm function in the control panel. When some of lamps and lanterns’ failure are occurred, the control panel will indicate the failure and also alarm with dry contact. The controller is patched with GPS receiver and photocell. The photocell is indicated to control the lights on/off automatically. The GPS receiver is used to control all of lights synchronization function. The fun...
Read more