2000cd Red LED Solar power Type B Medium intensity obstruction lights for High Voltage Power Tower

-

 

2000cd Strobe Red LED Solar-Powered Medium-Intensity Type B Obstruction Light for High Voltage Power Towers


Key Features:

  • Brightness: 2000cd output, ensuring visibility in all weather conditions.
  • Lighting Mode: Red strobe, meeting ICAO & FAA standards for Type B medium-intensity obstruction lights.
  • Power Source: Solar-powered with high-efficiency panels, designed for continuous operation and low maintenance.
  • Battery Backup: Long-lasting lithium battery for up to 7-10 days of autonomy in low sunlight conditions.
  • Durability: IP67-rated for water and dust resistance, ensuring longevity in extreme environments.
  • Applications: High Voltage Power Towers, telecommunications masts, and other tall structures.
  • Installation: Easy, tool-free mounting, and minimal wiring, suitable for remote locations.
  • Energy Efficiency: Low power consumption with optimized solar charging circuitry.

Application of 2000cd Strobe Red LED Solar-Powered Obstruction Lights

This medium-intensity Type B obstruction light is designed to enhance safety by marking high structures for aerial and ground visibility. It is specifically tailored for:

  1. High Voltage Power Towers
  2. Telecommunication and Broadcast Masts
  3. Wind Turbines
  4. Industrial Chimneys and Smokestacks
  5. Cranes and Construction Sites
  6. Airports and Helipads
  7. Bridges and Overpasses

Standards for 2000cd Strobe Red LED Solar-Powered Obstruction Lights

The 2000cd Medium-Intensity Type B Obstruction Lights comply with international and regional aviation safety standards. Below are the key standards they meet:


International Standards

ICAO (International Civil Aviation Organization):

  • Annex 14, Volume I (Aerodrome Design and Operations): Medium-Intensity Type B: 2,000cd effective red flashing light. Required for marking structures from 45m to 150m height above ground level.

2. United States Standards

FAA (Federal Aviation Administration):

  • Advisory Circular 150/5345-43J: Specification for Obstruction Lighting Equipment. Medium-Intensity Red Light (L-864): 2,000cd effective intensity, flashing at 20-40 flashes per minute.

3. European Standards

EASA (European Union Aviation Safety Agency):

  • Aligns with ICAO Annex 14 for obstruction lighting requirements.

4. Local Standards (Country-Specific)

  • Most countries adopt ICAO and FAA guidelines. Some may have additional requirements for environmental conditions (e.g., high temperatures, dust, or humidity).

5. Environmental Standards

Ingress Protection (IP):

  • IP67 or higher for water and dust resistance.

IEC Standards (International Electrotechnical Commission):

  • Compliance with IEC 60598-2-22 for luminaire safety and performance.

Battery & Solar Panel Standards:

  • Solar panels adhere to IEC 61215 for durability and efficiency.
  • Batteries comply with UN38.3 safety standards for transport and use.

Welcome to inquiry, Email: jodie@chendongtech.com

Comments

Post a Comment

Popular posts from this blog

AC220V AC230V Towers,Building,Chimney Photocell ,GPS Obstruction Lights and Controller

-
Image
Application Widely used in various fields of the air force,civilian airports and obstacle free airspace,helipads,iron tower,chimney,ports,wind power  plants,bridge and city high-rise building where require aviation Warning lights. Key Feature of CM-DKN Use the 304SUS shell and spray coating techniques, resistance to corrosion, anti-UV. The voltage of the power circuit and signal control line is same, so the connection of the wires are simple and reliability,  it will not cause damage to the lights and controller when connect the error line shortly. There is a customized fault alarm function in the control panel. When some of lamps and lanterns’ failure are occurred, the control panel will indicate the failure and also alarm with dry contact. The controller is patched with GPS receiver and photocell. The photocell is indicated to control the lights on/off automatically. The GPS receiver is used to control all of lights synchronization function. The fun...
Read more